
Ultimate construction dehumidifier
For a stripped home in the centre: 110 litres a day to dry out walls and floors that were wet right to the core.
View this unitPepinster lies where the Hoëgne flows into the Vesdre, in a narrow valley between Verviers and Liège. The centre grew up around the railway, the river and the factories, with rows of homes close to the water. The high water of July 2021 hit the centre hard, and repairs are still going on in many streets.
PepinsterThe right price starts with what needs to dry. For a whole house, wet screed or plasterwork you calculate a complete drying package; for a single room, a single unit may be suitable. Delivery in Pepinster is included in your drying package.
You hire a drying package calculated on the volume, the material and the temperature of your site. The price is known in advance and covers delivery, installation, the moisture reading at the start and at handover, and collection. Not dry within the calculated period? Then the hire continues free of charge, under the terms.

You don't need to combine units yourself. We calculate your drying package based on the floor area, the material and the layer thickness. You see the package price in advance, including delivery to postcode 4860, installation, readings before and after, and collection.
A calculated set-up for your floor, matched to the thickness of the screed. The final reading helps you and your floor layer decide when finishing can start.
More about this dryingConstruction dehumidifiers and fans for even drying throughout the house. We choose the capacity and spread the units over the rooms.
More about this dryingA leak or a flood? Have the cause repaired and standing water removed first. We assess the wet materials and match the drying to them.
More about this drying100% drying guarantee included. Is the material still not dry within the calculated period, despite correct drying conditions? Then you keep hiring the units free of charge, under our drying guarantee terms. This applies to calculated packages that we deliver and install; single units for collection are not covered.
No deposit. The calculator shows your total price and the extras you choose yourself, such as a condensate pump, extra heating or an official moisture report.
Higher up lie the villages of Wegnez, Cornesse and Soiron. Soiron is an old natural-stone village around a castle; Wegnez and Cornesse are more spread out. From Aartselaar to Pepinster we drive over an hour and a half.
In the centre of Pepinster it is often homes that were stripped back to the shell after the water: plaster off, floors out. Such a wall has to be dry right to the core before it is finished again, otherwise the moisture comes back through the new plasterwork. That is why the technician measures at the start and at collection.
In Soiron and Cornesse it is mainly old stone houses and farmhouses being renovated, with thick walls without a cavity and cellars against the slope. There the moisture comes from the renovation itself, and the cold, solid walls release it slowly.


For a stripped home in the centre: 110 litres a day to dry out walls and floors that were wet right to the core.
View this unit
Aimed low over an exposed floor, it gets the damp air out of corners and joints, where water lingers longest.
View this unit
For the thick stone walls of Soiron: it stops the air along the wall from staying saturated.
View this unit
In a home without working heating, this 30 kW heater brings the room up to temperature. It needs three-phase power.
View this unitWe drive over an hour and a half, via the E40, and then descend into the valley. You fix the delivery date when you book, and the time follows by mutual agreement. If there are still skips or site fences in your street, tell us where the technician can stop. He places the units, measures walls and floors and records the readings.
Our collection point in Aartselaar is over an hour and a half's drive from Pepinster, so over three hours there and back. A stripped home usually needs several units, and they rarely fit in a car together. With delivery you save that trip and get a reading as well.
Boomsesteenweg 12, Unit 11, 2630 Aartselaar
Mon–Fri 08:00–17:00, by appointment
Sites in the province of Liège, each with photos of the site itself. The same team, the same reading at the start and at handover.
The table helps you plan the hire period. A guide time does not confirm that the material is dry enough. The check before finishing is still needed.
| What needs to dry | Without a dehumidifier | With a Vernast drying package |
|---|---|---|
| Cement screed 5 cm | 6 to 9 weeks | 2 weeks |
| Cement screed 6 cm | 8 to 12 weeks | 3 weeks |
| Cement screed 7 cm | 10 to 15 weeks | 4 weeks |
| Plasterwork 1 cm | 1 to 2 weeks | 2 weeks |
| Plasterwork 2 cm | 2 to 4 weeks | 3 weeks |
| Plasterwork 3 cm | 3 to 6 weeks | 4 weeks |
The table gives guide values for planning. The actual drying time depends on the material and the conditions on site. Before finishing, have the residual moisture checked against the requirements of your floor layer or decorator. For calculated packages, free continued hire applies under the drying guarantee terms. How long screed needs to dry explains it case by case.
We deliver in Pepinster and the surrounding municipalities. Choose a place below for details on hire and delivery, or see our service area in the province of Liège.
Delivery to Amel, Aubel, Baelen and the other places below. Choose your municipality for details on hiring a dehumidifier.
See for each municipality how to hire a construction dehumidifier, what a drying package includes and how to arrange delivery.
From your request to collection. We agree the installation, explain how to use the units and follow the drying process with moisture readings.
Calculate your package online or call us for advice. Give us your site address, your preferred start date and the dimensions of the rooms.
At the agreed time the technician installs the units, connects the condensate drain and explains how to use them.
Use the set-up as the technician explained. Check the condensate drain and report any faults or new moisture problems.
We check the moisture and arrange collection. For calculated packages, free continued hire applies if the drying guarantee terms are met.
Read how customers experience Vernast's delivery, appointments and follow-up. These reviews are about our service across our whole service area.
“Snelle respons en dezelfde dag nog een droger geïnstalleerd. Top service!”
“Zeer goede service en flexibiliteit. Werken zijn uitstekend uitgevoerd. Vriendelijk personeel. Firma zeker aan te raden.”
“We zijn bijzonder tevreden. Het personeel is professioneel én vriendelijk. Het werk is grondig uitgevoerd. Bovendien werd het achteraf goed opgevolgd.”
Our drying experts will help you straight away, with advice tailored to your situation.
By measuring, not by feel. A wall can seem dry on the surface while the core is still wet. The technician takes readings at the start and at collection, and you can pass those values on to the plasterer.
Yes, and then we usually add a site heater. A condensation dehumidifier needs warmth to work well. The technician checks whether there is a suitable 400 V connection for the heater and adapts the set-up accordingly.
Yes, we deliver in all parts of Pepinster, including the villages on the slopes. In Soiron the lanes are narrow. Mention when you book whether loading is possible outside the door.
The walls are solid, thick and without a cavity. The moisture from a renovation moves slowly to the surface there and only disappears when the air next to it is dry. A fan next to the dehumidifier speeds that up noticeably.
Installed and set up by our technician, with a moisture reading at the start and at handover. Prefer to talk it through first? Feel free to call us.

Briefly describe what needs to dry and how big the room is. A drying specialist will reply within one working day, with a proposal for the right package.