Leuven · Vilvoorde · Halle · Aarschot · the Brussels periphery

Construction dehumidifier hire in Flemish Brabant

Hire a construction dehumidifier for your new build, renovation or water damage in Flemish Brabant. Vernast delivers across the whole province, from Leuven and Aarschot to Halle and the Brussels periphery. Delivery, installation and collection are included in the price of your drying package. Calculate online which package suits your site or call us for advice.

Vernast's service area, with Flemish Brabant highlightedFlemish Brabant
Delivery by appointmentinstalled and set up by our technician
One point of contact for your site

What does dehumidifier hire cost in Flemish Brabant?

The right price starts with what needs to dry. For a whole house, wet screed or plasterwork you calculate a complete drying package; for a single room, a single unit is enough. Among other places, we deliver to Leuven, Vilvoorde, Halle, Aarschot; you can collect in Aartselaar, near Antwerp.

You hire a drying package calculated on the volume, the material and the temperature of your site. The price is known in advance and covers delivery, installation, the moisture reading at the start and at handover, and collection. Not dry within the calculated period? Then the hire continues free of charge, under the terms.

A single construction dehumidifier, set up yourself
from €9 per day, excl. VAT
Drying package tailored to your site
one fixed price, calculated in advance
Delivery, installation, moisture reading and collection
included in every package
Deposit
none
Worry-free hire with Vernast: one price up front, no deposit
Price known in advanceno deposit, no extra charges afterwards
Your complete drying package

Construction drying in Flemish Brabant, from installation to a dry result.

You don't need to combine units yourself. We calculate your drying package based on the floor area, the material and the layer thickness. You see the package price in advance, including delivery in Flemish Brabant, installation, readings before and after, and collection.

Screed drying

A calculated set-up for your floor, matched to the thickness of the screed. The final reading helps you and your floor layer decide when finishing can start.

More about this drying

Plasterwork and new builds

Construction dehumidifiers and fans for even drying throughout the house. We choose the capacity and spread the units over the rooms.

More about this drying

Drying after water damage

A leak or a flood? Have the cause repaired and standing water removed first. We assess the wet materials and match the drying to them.

More about this drying

100% drying guarantee included. Is the material still not dry within the calculated period, despite correct drying conditions? Then you keep hiring the units free of charge, under our drying guarantee terms. This applies to calculated packages that we deliver and install; single units for collection are not covered.

No deposit. The calculator shows your total price and the extras you choose yourself, such as a condensate pump, extra heating or an official moisture report.

What we dry here

Construction drying for your project in Flemish Brabant

For a site in Leuven, the Brussels periphery, the Hageland or the Pajottenland, the situation inside the building is the starting point. Is it a lived-in flat, a house under renovation or an open new-build site? Tell us which rooms stay in use and when the next contractor is due. That way we can discuss the installation and follow-up with you.

New screed and plasterwork bring moisture into the building. When choosing a drying package, the material, thickness, volume and temperature matter most. Let us know when the material was laid as well. The drying set-up and the moment you start must follow the instructions of your contractor or material supplier.

With a damp cellar or a leak, the work starts with the cause: if water keeps coming in, drying alone is not a lasting solution. Have the leak or water ingress dealt with first and remove any standing water. We then look at which materials are wet and whether the moisture is also under a floor or behind a wall.

Temperature and air circulation matter too. On a cold site, extra heating may be needed, depending on the dehumidifier and the conditions. Discuss the power supply before you book a site heater. The maximum capacity on a data sheet is not a fixed amount of water the unit will remove every day on every site.

Renovated villa being finished in the Brussels periphery
The units

Which units suit your site?

Vernast Performance, Performance condensation dehumidifier extracting 70 litres a day for rooms up to 400 m³

Performance construction dehumidifier

For larger rooms or several drying zones. The capacity you need depends on the volume and the wet materials. The layout of your site decides where the units go. From €12 per day.

View this unit
Vernast Ultimate, Ultimate condensation dehumidifier extracting 110 litres a day for rooms up to 600 m³

Ultimate construction dehumidifier

For large volumes and a heavy moisture load. Check the data sheet and have the set-up matched to the rooms that actually need to dry. From €16 per day.

View this unit
Vernast Turbo, 2,250 m³/h, blows precisely across floors and screed

Turboflow radial fan

For targeted air circulation along a floor or wall. Where it goes depends on the zone that needs to dry. Combine air movement with enough dehumidifying capacity. From €5 per day.

View this unit
Vernast Boost, Boost condensation dehumidifier extracting 50 litres a day for rooms up to 250 m³

Boost construction dehumidifier

For a single room or a smaller drying zone. Give us the dimensions, the temperature and the amount of moisture so we can tell whether this unit has enough capacity. From €9 per day.

View this unit
Two ways

Collection or delivery in Flemish Brabant?

Delivery and installation in Flemish Brabant

We deliver to Leuven, Vilvoorde, Halle, Aarschot and the other municipalities in Flemish Brabant. Delivery, installation and collection are included in your drying package. Give us the full site address, your preferred start date and a contact person. Mention anything unusual, such as a narrow passage, a floor without a fixed staircase or limited loading space, before we arrange the delivery.

The technician spreads the units over the agreed drying zones and explains how to use the set-up. We also go through the condensate drain and what you check yourself during the hire. Keep the access clear and make sure the agreed power supply is available. If something changes on site or water gets in again, get in touch with us.

Delivery, installation and collection
Included in the drying package
Delivery time
As per your booking
Floor without a fixed staircase
Discuss in advance; ladder surcharge €39 per floor
Condensate pump
€2 per dehumidifier per day, if chosen

Among other places, we deliver to Leuven, Vilvoorde, Halle, Aarschot, Tienen, Zaventem, Dilbeek, Grimbergen, Diest, Asse, Overijse, Tervuren, Machelen, Beersel, Sint-Pieters-Leeuw, Haacht.

Book with delivery

Collecting it yourself from Flemish Brabant

A single unit can be collected by appointment from our warehouse at Boomsesteenweg 12, unit 11 in Aartselaar. Book in advance and check the collection rates. When choosing between collection and delivery, take the return trip into account as well. Make sure the unit fits in your vehicle and follow the transport instructions for the model you chose.

If you collect the unit, you set it up yourself. So tell us in advance what needs to dry and what power connection you have. For several rooms, hard-to-reach areas or if you are unsure about the capacity you need, you can ask for advice on a drying package with installation. The agreed hire period and any extras are shown in your booking.

Boomsesteenweg 12, Unit 11, 2630 Aartselaar
Mon–Fri 08:00–17:00, by appointment

Collection point
Boomsesteenweg 12, unit 11, Aartselaar
Collection time
By appointment
Transport
As per the instructions for the chosen unit
Prefer delivery?
Delivery and installation included in your drying package
How collection works
From the field

Sites we have dried in Brussels and its periphery

Take a look at examples from the nearby Brussels-Capital Region. For each project you will find the location, the work carried out and the available photos. Below them is every other site we dried in Flemish Brabant, 3 in total.

View all projects

How long does it take

Drying times with and without a dehumidifier.

The table helps you plan the hire period. A guide time does not confirm that the material is dry enough. The check before finishing is still needed.

Drying times by material and thickness
What needs to dryWithout a dehumidifierWith a Vernast drying package
Cement screed 5 cm6 to 9 weeks2 weeks
Cement screed 6 cm8 to 12 weeks3 weeks
Cement screed 7 cm10 to 15 weeks4 weeks
Plasterwork 1 cm1 to 2 weeks2 weeks
Plasterwork 2 cm2 to 4 weeks3 weeks
Plasterwork 3 cm3 to 6 weeks4 weeks

The table gives guide values for planning. The actual drying time depends on the material and the conditions on site. Before finishing, have the residual moisture checked against the requirements of your floor layer or decorator. For calculated packages, free continued hire applies under the drying guarantee terms. How long screed needs to dry explains it case by case.

Where we deliver

The municipalities in Flemish Brabant, area by area.

We deliver everywhere in Flemish Brabant. Choose your municipality below for details on hire, delivery and collection. Is your town not listed? Get in touch.

Tienen and Flemish Hesbaye

Delivery to Tienen, Hoegaarden, Landen and the other places below. Choose your municipality for details on hiring a dehumidifier.

Choose your municipality for details on dehumidifier hire. For advice on your site or help with your booking, call us on 03 689 90 65 or calculate your package straight away.
How it works

From booking to final reading in Flemish Brabant.

From your request to collection. We agree the installation, explain how to use the units and follow the drying process with moisture readings.

01

You book

Calculate your package online or call us for advice. Give us your site address, your preferred start date and the dimensions of the rooms.

02

We deliver and install

At the agreed time the technician installs the units, connects the condensate drain and explains how to use them.

03

The set-up runs

Use the set-up as the technician explained. Check the condensate drain and report any faults or new moisture problems.

04

We measure and collect

We check the moisture and arrange collection. For calculated packages, free continued hire applies if the drying guarantee terms are met.

We deliver throughout Belgium and the south of the Netherlands. We also drive outside the provinces below, although the journey then counts in the planning. Feel free to call us about a site just over the provincial border. Dehumidifier hire also in: Antwerp, East Flanders, Brussels-Capital Region, West Flanders, Limburg, Walloon Brabant, Hainaut, Namur, Luxembourg and Liège.
What customers say

Our customers' experiences.

Read how customers experience Vernast's delivery, appointments and follow-up. These reviews are about our service across our whole service area.

“Snelle respons en dezelfde dag nog een droger geïnstalleerd. Top service!”
Matt DemyttenaereBouwdroger geïnstalleerd
“Zeer goede service en flexibiliteit. Werken zijn uitstekend uitgevoerd. Vriendelijk personeel. Firma zeker aan te raden.”
Ingrid Janssensmrt 2025
Solvari
“We zijn bijzonder tevreden. Het personeel is professioneel én vriendelijk. Het werk is grondig uitgevoerd. Bovendien werd het achteraf goed opgevolgd.”
Leosep 2024
Frequently asked questions

What customers in Flemish Brabant ask us.

Is your question not listed?

Our drying experts will help you straight away, with advice tailored to your situation.

Calculate your drying package online or contact us with your address in Flemish Brabant, the size of the room and your preferred start date. Let us know the floor level and the available power supply too. We then agree the delivery time and access to the site with you.

That depends on the volume, the layout, the material and the amount of moisture. An open-plan floor needs a different set-up from several closed rooms. Use the calculator for your package and ask for advice if your situation is different, for example with a high room or hidden moisture.

The hire period alone gives no certainty about that. Have the residual moisture checked with a method that suits the material. Your floor layer or decorator decides which moisture reading, and any further measurement, is needed before the chosen finish can be applied.

That depends on the access and the unit. When you make your request, mention the floor level, any lift and narrow passages. If there is no fixed staircase, discuss in advance how the units will be taken up and which surcharge applies.

The connected load differs per unit. Check the data sheet and tell us which connection is available on your site. The 20 and 30 kW electric site heaters need a suitable 400 V supply. If in doubt, have the available capacity and the circuit protection checked.

Collection is possible by appointment from our warehouse in Aartselaar, Boomsesteenweg 12, unit 11. Book your unit in advance and make sure it fits in your vehicle. Follow the transport instructions for the chosen unit. With a delivered drying package, we take care of installation and collection.

Need a construction dehumidifier in Flemish Brabant

Calculate your drying package and choose your delivery date.

Installed and set up by our technician, with a moisture reading at the start and at handover. Prefer to talk it through first? Feel free to call us.

Vernast technician by the van with a construction dehumidifier
A question about your situation?

A question about drying in Flemish Brabant?

Briefly describe what needs to dry and how big the room is. A drying specialist will reply within one working day, with a proposal for the right package.

We only use your details to answer your question. Rather have a price straight away? Calculate your drying package.
03 689 90 65