

30 kW electric site heater with built-in thermostat. Brings cold rooms up to temperature so drying becomes effective.
Drying depends on temperature. Warm air can hold far more moisture than cold air, and warm building fabric releases its moisture faster. Below 15 °C the efficiency of a condensation dehumidifier drops sharply; below 10 °C the process becomes really slow.
That is exactly where this heater comes in. In a cellar, an unheated new build or a winter site, the Heatpower 30 brings the space up to working temperature, so the dehumidifier can work at full capacity again. The combination gives a much shorter drying time than the dehumidifier on its own.
With 30 kW and a built-in thermostat, the unit also heats large volumes and keeps the temperature stable without you having to stand next to it. A 400 V (three-phase) connection is required; our technician checks this on delivery.
Brings even large cold spaces up to working temperature quickly.
Below 15 °C a dehumidifier on its own does not work efficiently enough.
Keeps the target temperature automatically, no supervision needed.
We check on delivery whether your connection is suitable.
All values as measured under standard conditions. Questions about your specific situation? Call us.
| Type | Electric site heater with fan |
| Heat output | 30 kW |
| Settings | several power levels |
| Supply voltage | 400 V / 3~ / 50 Hz |
| Thermostat | built in, adjustable |
| Airflow | approx. 2,000 m³/h |
| Housing | steel, powder-coated |
| Safety | overheating protection |
| Dimensions (w × d × h) | approx. 45 × 50 × 55 cm |
| Weight | approx. 24 kg |
| Application | cellars, winter sites, unheated new builds |
You hire individual units at lower collection prices through our collection checkout. You book online and collect whenever suits you; we get everything ready.
Choose your unit, hire period and collection time. You pay up front with a 5% discount, or just the deposit.
You receive your booking confirmation with directions and what to bring (identity card).
Your unit is ready at our collection point. Any outstanding balance you scan and pay here by Bancontact, card or Apple Pay. Bring a large boot, estate car or trailer.
Return the unit at the agreed time. Your invoice will already be in your inbox.
We only deliver and install as a package; that's the only way we can deliver on our 100% drying guarantee.
Circulation and temperature determine how quickly moisture leaves the building fabric. These units reinforce each other.

Compact condensation dehumidifier on wheels. The right choice for a single room, a flat or a smaller renovation.

Our most hired unit and the standard for new builds. Dries screed and plaster reliably within a few days.

The most powerful unit in the range. For large sites, cellars and water damage where every day counts.

Dries in a targeted way through hoses: under floors, inside walls and in hard-to-reach places. Also works at low temperatures.

Powerful site fan moving 4,500 m³/h of air. Makes sure the dry air actually sweeps along walls and floors.

Blows air precisely across floors and screed, including under cabinets and into corners. The regular partner of a dehumidifier for floor drying.

20 kW electric site heater with thermostat. Brings smaller cold rooms up to temperature so the drying keeps going.
Because drying depends on temperature. Below 15 °C air absorbs little moisture and the building fabric releases its water slowly. The heater brings the space up to temperature so the dehumidifier works at full capacity; together you dry considerably faster.
Yes, this unit requires a 400 V three-phase connection. Our technician checks this on delivery. If you do not have three-phase power, we will look at an alternative together.
A 30 kW heater is not an economical appliance, but in a cold space it is the only way to make drying work. Without a heater your dehumidifier hire lasts much longer, which ends up costing more.
The thermostat and the overheating protection allow continuous use. During installation our technician explains how to position the unit safely and what distance to keep from materials.
At our collection point: Boomsesteenweg 12 / Unit 11, 2630 Aartselaar, right by the A12, easy to reach from Antwerp and Brussels. Open Mon–Fri from 08:00 to 17:00.
Your identity card and your booking confirmation (on your phone is fine). We load the unit into your car or trailer.
Yes, but only as part of a calculated drying package. That's the only way we can deliver on our 100% drying guarantee. Calculate your package with the Calculator.
You save on transport and installation costs. Booking is done online: pay everything up front with a 5% discount, or confirm with a deposit and settle the rest when you collect.
Enter your floor area and ceiling height, and you'll see straight away which unit, how many units and what price suit your space.
