Home /Construction drying /Complete drying package
All-in-one drying service

Complete drying package

Home up to 180 m² · plaster + screed · heating included

10units in this package
260 Lmoisture extraction per 24 hours
28days expected drying time
24 hdelivered and installed
All-in-one drying serviceComposition of your drying package: 2× Boost, 50 l / 24 h, 2× Performance, 80 l / 24 h, 4× Highflow, 5,300 m³/h, 2× Electric heater, 3.30 kW
Category: Delivery

Complete drying package, home up to 180 m²

Free delivery* within 50 km, set up and adjusted by our technician
Transparent prices with no surprises, you see the total up front
Tailored advice from a building expert, during the drying as well
Energy-efficient ECO units, lower consumption per litre of moisture extracted
Free moisture reading before and after with every package, you see the result in black and white

* Gratis binnen 50 km van ons magazijn in Aartselaar — Antwerpen, Mechelen, Brussel, het Waasland, Leuven en de Kempen. Daarbuiten rekenen wij een transportvergoeding vanaf € 79 excl. btw voor levering én ophaling samen. Het exacte bedrag hangt af van uw postcode en staat in de boeking, vóór u betaalt.

Available now — you choose your delivery day
€1,190.88
for 4 weeks · all included · incl. VAT

Your package

Included units

Calculated automatically from your floor area and plaster and screed thickness. A ready-made package: exactly what your drying needs, nothing more.

2×Boost, 50 l / 24 hBoost, 50 l / 24 hAutomatic operation · low noise level · water tank€193.60 / 2 wks
2×Performance, 80 l / 24 hPerformance, 80 l / 24 hPowerful when the moisture load increases€254.10 / 2 wks
4×Highflow, 5,300 m³/hHighflow, 5,300 m³/hSplash-proof (IP55) · 3 speeds · 0.25 kW€212.96 / 2 wks
2×Electric heater, 3.30 kWElectric heater, 3.30 kWBuilt-in thermostat · even distribution€84.70 / 2 wks
260 L
Moisture extraction per 24 h
21.2k
m³/h airflow
28
Days expected drying time

What does each unit do?

Your package explained

Drying is an interplay of capacity, circulation and temperature. If one is missing, the drying time goes up, which is why we put together packages instead of hiring out individual units.

Boost, 50 l / 24 hCapacity · 2× in your package

Boost, 50 l / 24 h

The Boost construction dehumidifier extracts up to 50 litres of moisture per 24 hours. Compact, on wheels and quiet enough to stay in place while work goes on. This is the base capacity of your package: without enough litres a day, drying drags on.

Performance, 80 l / 24 hExtra capacity · 2× in your package

Performance, 80 l / 24 h

The Performance construction dehumidifier takes up to 70 litres per 24 hours out of the air. We add this unit as soon as the volume or the moisture load increases, for example with thicker screed or a complete house in one go.

Highflow, 5,300 m³/hCirculation · 4× in your package

Highflow, 5,300 m³/h

Each axial fan moves 4,500 m³ of air per hour. A thin layer of saturated air forms against a wet wall or screed, and that is where drying stops. The fans break up that layer so dry air keeps coming into contact with the wet surface.

Electric heater, 3.30 kWTemperature · 2× in your package

Electric heater, 3.30 kW

The 3.30 kW electric heater brings the room up to working temperature. Below 15 °C air absorbs hardly any moisture and the building fabric releases its water slowly; with added heat the dehumidifier works at full capacity again.

From delivery to collection

What drying could look like in your home.

From the first moisture check to setting up the equipment: explore our approach and some possible arrangements in a home.

The technician delivers the dehumidifier and fan to your site by van.
Delivery

The technician delivers the dehumidifier and fan to your site by van.

1 / 6

AI-generated example images, not customer projects. The setup depends on your rooms and package contents. Equipment numbers in these images are illustrative; your included equipment is listed above. Condensate pumps are optional accessories.

Included with delivery

At no extra cost

The hire price is an all-in price. All of this comes as standard with every package, without you having to ask for it.

Free moisture reading at delivery and collection

When setting up, our technician measures the moisture levels of the screed, plaster and air, and measures again at collection. That way you know in black and white that the room is dry before you finish it. Always included; a signed measurement report for your insurer or file is available as an option.

Delivery, placement and collection, on the day you choose

We bring all the units to the site in the time slot you choose and collect them again as soon as the drying is done. Within 50 km of our warehouse in Aartselaar that is included in the package price; beyond it a transport charge applies from €79 excl. VAT for the outbound trip and the collection together. You enter your postcode at the first step of the booking and see the exact amount straight away.

Positioning, connection and adjustment

Every unit goes in the right position, the condensate drain is connected and the target humidity is set. You don't have to carry or programme anything.

On-site explanation and a helpdesk you can reach

The technician explains how the units work and what target value you can expect. Throughout the hire period, our moisture experts are available by phone.

Extend or stop early, flexibly

If the drying takes longer, you extend online with one click. If you're done sooner, you stop the hire and only pay for the days you actually used.

Why a package works

Drying is capacity, circulation and temperature.

If one of the three is missing, the drying time goes up, or the process even stops altogether. That's why we put together complete packages instead of hiring out individual units.

01

Capacity

The construction dehumidifiers determine how many litres of moisture can be taken out of the air each day. We size to your actual volume, not too small, not too big.

02

Circulation

Without air movement, a saturated layer forms against the screed and walls, and that's where the drying stops. The fans break it up and win you days.

03

Temperature

Below 15 °C, air barely absorbs any moisture. The heater brings cold rooms up to working temperature, so the dehumidifiers run at full power.

60%faster drying than natural drying
48 hbefore mould starts to grow, so starting quickly pays off
≤ 2%residual moisture required before you can finish
24 hdelivered, positioned and adjusted

Compact, quiet and always ready

With a dehumidifying capacity of up to 50 litres per 24 hours, this construction dehumidifier removes moisture from spaces of up to about 250 m³. On wheels, compact and quiet enough to stay in place while work goes on.

Automatic, economical and maintenance-free

The unit works fully automatically: the built-in hygrostat throttles it back as soon as the target humidity is reached. We connect a condensate hose as standard, so there is no water for you to empty.

Dehumidification

Max. capacity [l/24 h]50
Operating range [°C]5 – 32
Operating range [% RH]30 – 90

Airflow

Max. level [m³/h]300

Electrical values

Mains connection230 V / 50 Hz
Power input [kW]0.75
PlugCEE 7/7

Dimensions

w × d × h [cm]43 × 43 × 65
Weight [kg]32
Water tankwith continuous drainage

Powerful under a higher moisture load

This construction dehumidifier extracts up to 70 litres per 24 hours and covers volumes of up to about 400 m³. We add the unit as soon as the moisture load increases: thicker screed, a complete house or a shorter deadline.

More capacity, the same simplicity

Despite its higher output, the noise level stays low enough for occupied rooms, and automatic operation means you can simply leave the unit running.

Dehumidification

Max. capacity [l/24 h]70
Operating range [°C]5 – 32
Operating range [% RH]30 – 90

Airflow

Max. level [m³/h]550

Electrical values

Mains connection230 V / 50 Hz
Power input [kW]1.1
PlugCEE 7/7

Dimensions

w × d × h [cm]50 × 50 × 87
Weight [kg]50
Water tankwith continuous drainage

Robust ventilation

With an airflow of up to 4,500 m³/h, this axial fan is ideal for speeding up drying or circulating fresh air. Compact yet solidly built, you can place it effortlessly wherever ventilation makes the difference.

Quiet, economical and versatile

This fan runs on an ordinary 230 V socket, is splash-proof (IP55) and uses only 0.25 kW. With 3 speeds and an air speed of up to 39.6 km/h, it is ready for any situation, indoors and outdoors.

Airflow

Max. level, free blowing [m³/h]5,300

Air pressure

Max. level [Pa]80

Fan

Speeds3

Air outlet speed

m/s11
km/h39.6

Electrical values

Mains connection230 V / 50 Hz
Rated current [A]1.1
Power input [kW]0.25
recommended fuse [A]10

Electrical connection

PlugCEE 7/7

Targeted drying of screed and floors

The radial fan blows a narrow, powerful jet just above the floor. That way you reach under the screed, behind skirting boards and into the corners an axial fan cannot reach, exactly where moisture lingers longest.

Perfect for closed rooms and screed

With 2,250 m³/h, three speeds and an extra socket for series connection, this is the unit we add as standard for screed and after water damage.

Airflow

Max. level [m³/h]2,250

Fan

Speeds3
Extra socketyes, in series

Electrical values

Mains connection230 V / 50 Hz
Power input [kW]0.50
Protection ratingIP55

Dimensions

w × d × h [cm]48 × 39 × 45
Weight [kg]15
Stackableyes

Ideal for temporary heating

Drying depends on temperature: below 15 °C air absorbs hardly any moisture and the building fabric releases its water slowly. This heater brings the room up to working temperature so the dehumidifiers work at full capacity again.

Built-in thermostat and direct heat

The built-in thermostat keeps the desired temperature automatically, the fan spreads the heat evenly and the overheating protection allows unattended use.

Heating

Heat output [kW]3.30
Settings2 + ventilation
Thermostatbuilt in, adjustable

Airflow

Max. level [m³/h]300

Electrical values

Mains connection230 V / 50 Hz
Rated current [A]14.3
recommended fuse [A]16

Safety

Protectionoverheating protection
Housingsteel, powder-coated
Weight [kg]10