Mould removal · mould & odour

Scrubbed the mould off and it still came back? Then it goes deeper than the wall.

An ozone treatment spreads active oxygen (O₃) into every crack of the room, kills mould spores, bacteria and dust mites, and breaks down the musty damp smell, even where brush and paint can't reach.

  • Carried out by our own technicians
  • No chemical residues
  • Throughout Flanders
Sound familiar?

You removed the mould, and still it comes back.

That is rarely down to how thoroughly you scrubbed. Mould works through spores, and they sit in places a cloth never reaches.

01

Spores stay behind

Mould reproduces through microscopic spores lodged in cracks, joints and pores. What you wipe away is only the tip.

02

The room stays contaminated

Spores also float in the air and settle again elsewhere. You clean one wall, but the room remains a breeding ground.

03

The smell keeps coming back

The musty smell of mould is trapped in materials and fabrics. Airing and painting mask it for a while, then it's back.

Dry first, then ozone. Ozone kills what is there and breaks the cycle, but without a dry structure the mould comes back. If there is still moisture in the wall or screed, we dry first, with a calculated drying package, confirmed by a moisture reading. Only then does a treatment make sense.
What is ozone?

Oxygen with an extra atom.

The air you breathe is O₂: oxygen with two atoms. Ozone is O₃, with a third, loosely bound atom. It is exactly that extra atom that makes ozone so powerful.

That third atom lets go easily and attacks mould spores, bacteria and odour molecules. Ozone then breaks down by itself into ordinary oxygen, without residue. And because it is a gas, it spreads by itself into every corner of the room.

How does it work?

A gas that gets everywhere you can't.

An ozone generator converts the oxygen in the room into ozone. Because it is a gas, it spreads by itself: into cracks, joints, behind furniture, into fabrics and the ventilation duct, places you never reach with a brush.

O₃ active oxygen mould spore

During the treatment the room is unoccupied. Afterwards the ozone breaks down by itself into ordinary oxygen, and after a short airing the room is safe to use again. No chemical residues are left on surfaces or in fabrics.

Breaking the cycle

Why ozone comes after drying and mould removal.

Mould removal takes away the visible mould. Ozone clears up what is left, so the mould gets no chance to restart.

1

Dry and remove the mould first

The structure dries until a moisture reading confirms it and the visible mould is removed. See mould removal. The surface looks clean again.

2

Ozone clears up the rest

The treatment kills the remaining spores in the air, in cracks and in fabrics, throughout the room, not just on the wall.

3

No recontamination

Without living spores that can settle again, the room stays free of mould and odour for a long time, provided it stays dry.

Where drying stops

Measure first, then dry, then ozone.

We are drying specialists first and foremost. That is why we first check whether the moisture has really gone: after water damage or in a damp cellar that is half the job. Only when the reading says dry is ozone the final step that removes the smell and the spores.

Request your treatment
Vernast specialist in a protective suit during an ozone treatment
What do we use it for?

More than just mould.

Because ozone tackles microbes and odour molecules alike, we use it in a wide range of situations, always in addition to a healthy, dry room.

Mould & spores

After mould removal: the spores left behind in the air, joints and fabrics are killed, so the mould gets no chance to restart.

Dust mites

Ozone tackles dust mites in mattresses, carpets and fabrics. A relief for allergy sufferers who don't know where it comes from.

Stubborn odours

Smells of damp, smoke, pets or fire are neutralised at molecular level. Not covered up with a fragrance, but broken down.

Cellars & crawl spaces

Damp, poorly ventilated spaces where mould and stale air take hold, and where a brush can't reach everywhere.

After water damage

After a leak or a flood: disinfecting the room and removing the damp smell that lingers after drying.

Before letting or selling

A fresh, disinfected and odour-free home at handover. No musty first impression at a viewing or an inventory check.

Our equipment

Professional German ozone generators.

We work with powerful, professional German-made ozone generators, not hobby units. They produce a high, adjustable ozone output, matched to the volume of the room, so the treatment is thorough and controlled.

They are always operated by our own technicians, with the necessary safety measures. While the generator is running, people and pets must stay out of the room.

Origin
German-made
Output
High ozone output
Control
Timer & output
Operation
Unoccupied, by our technician
Safe & responsible

Powerful during, harmless after.

Ozone is so powerful precisely because it is reactive. That is why a treatment belongs in professional hands, and we follow a fixed protocol.

Unoccupied treatment

While it runs, the room is closed off: no people, no pets, no plants. We keep an eye on the timing.

Breaks down to oxygen

After the treatment, ozone breaks down by itself into ordinary oxygen (O₂). No chemical residues on surfaces or fabrics.

Short airing

Afterwards we air the room. As soon as the levels are safe, it can be used normally again.

Always after drying

Ozone is the finishing touch. A lasting result first needs a dry structure, and we will give you honest advice on that.

What customers say

How we work, in their words.

Reviews of Vernast on Google and Solvari, quoted word for word (in Dutch). About speed, follow-up and keeping appointments, because that is what a treatment in your home requires.

Snelle respons en dezelfde dag nog een droger geïnstalleerd. Top service!

Matt Demyttenaere Google · Oct 2023

Zeer goede service en flexibiliteit. Werken zijn uitstekend uitgevoerd. Vriendelijk personeel. Firma zeker aan te raden.

Ingrid Janssens Google · Mar 2025

We zijn bijzonder tevreden. Het personeel is professioneel én vriendelijk. Het werk is grondig uitgevoerd. Bovendien werd het achteraf goed opgevolgd.

Leo Solvari · Sep 2024
Frequently asked questions

Your questions about ozone treatment.

Can't find your question?

We look at your situation and tell you honestly whether a treatment makes sense, and what may need to happen first.

Why does my mould keep coming back after cleaning? +

Because surface cleaning only removes the visible mould. The microscopic spores stay behind in cracks, joints, fabrics and in the air, and settle again as soon as conditions are right. An ozone treatment kills those remaining spores throughout the room. Important: always deal with the cause of the damp first and dry the structure, otherwise the mould will come back regardless.

Is an ozone treatment safe? +

Yes, provided it is carried out by professionals. During the treatment nobody may be in the room, no people, pets or plants: ozone is powerful precisely because it is reactive. After the treatment it breaks down by itself into ordinary oxygen and a short airing is enough. The room is then safe to use again and no chemical residues are left on surfaces or in fabrics.

Does ozone replace drying my home? +

No. Ozone is the finishing step: it clears up the existing contamination, but does not solve the cause. If the wall or the screed stays damp, the mould comes back. That is why we first dry the structure with construction dehumidifiers until a moisture reading confirms it, and use ozone as the final step.

What else do you use ozone for? +

Besides mould, we use ozone against dust mites in mattresses, carpets and fabrics, against stubborn odours from damp, smoke, pets or fire, to disinfect cellars and crawl spaces, after water damage, and to make a home fresh and odour-free before it is let or sold.

Which equipment do you use? +

We work with professional German-made ozone generators, not hobby units. They deliver a high, adjustable ozone output that we match to the volume of the room, so the treatment is thorough and controlled. They are always operated by our technicians, with the necessary safety measures.

How long does it take and can I go back in straight away? +

A treatment usually takes a few hours, depending on the volume of the room. While it runs, the room is unoccupied and closed off. Afterwards we air it briefly; as soon as the levels are safe, the room can be used normally again. Our technician will tell you on site how long that is in your situation.

Book your treatment

Mould or a smell that just keeps coming back?

Describe your situation below and a specialist will call you within one working day to schedule the treatment. We tackle the cause first and use ozone as a thorough finish, clearly, correctly and without false expectations.

  • Response within one working day
  • Honest advice: sometimes drying is the real answer
  • Working throughout Flanders

Rather call straight away? 03 689 90 65, Mon–Fri, 8am–5pm

1. Your details2. Your situation