
Ultimate construction dehumidifier
For large volumes and a heavy moisture load. Check the data sheet and have the set-up matched to the rooms that actually need to dry. From €16 per day.
View this unitNeed a construction dehumidifier for your new build, renovation or after water damage in Limburg? Vernast delivers and installs construction dehumidifiers on your site, from Hasselt and Genk to Sint-Truiden and the Maasland. With a drying package, delivery, installation and collection are included. Calculate your package and hire price online or call us for advice on the units you need.
LimburgThe right price starts with what needs to dry. For a whole house, wet screed or plasterwork you calculate a complete drying package; for a single room, a single unit is enough. Among other places, we deliver to Hasselt, Genk, Sint-Truiden, Tongeren; you can collect in Aartselaar, near Antwerp.
You hire a drying package calculated on the volume, the material and the temperature of your site. The price is known in advance and covers delivery, installation, the moisture reading at the start and at handover, and collection. Not dry within the calculated period? Then the hire continues free of charge, under the terms.

You don't need to combine units yourself. We calculate your drying package based on the floor area, the material and the layer thickness. You see the package price in advance, including delivery in Limburg, installation, readings before and after, and collection.
A calculated set-up for your floor, matched to the thickness of the screed. The final reading helps you and your floor layer decide when finishing can start.
More about this dryingConstruction dehumidifiers and fans for even drying throughout the house. We choose the capacity and spread the units over the rooms.
More about this dryingA leak or a flood? Have the cause repaired and standing water removed first. We assess the wet materials and match the drying to them.
More about this drying100% drying guarantee included. Is the material still not dry within the calculated period, despite correct drying conditions? Then you keep hiring the units free of charge, under our drying guarantee terms. This applies to calculated packages that we deliver and install; single units for collection are not covered.
No deposit. The calculator shows your total price and the extras you choose yourself, such as a condensate pump, extra heating or an official moisture report.
For your site in Limburg, we look at the actual dimensions and layout. If a ground floor, an upper floor and a garage all need to dry at the same time, give us the details of each space. A unit in the hallway does not automatically reach every closed room. The number of construction dehumidifiers follows from the project; there is no fixed package that suits every home in Limburg.
New screed and plasterwork bring moisture into the building. When choosing a drying package, the material, thickness, volume and temperature matter most. Let us know when the material was laid as well. The drying set-up and the moment you start must follow the instructions of your contractor or material supplier.
With a damp cellar or a leak, the work starts with the cause: if water keeps coming in, drying alone is not a lasting solution. Have the leak or water ingress dealt with first and remove any standing water. We then look at which materials are wet and whether the moisture is also under a floor or behind a wall.
Temperature and air circulation matter too. On a cold site, extra heating may be needed, depending on the dehumidifier and the conditions. Discuss the power supply before you book a site heater. The maximum capacity on a data sheet is not a fixed amount of water the unit will remove every day on every site.


For large volumes and a heavy moisture load. Check the data sheet and have the set-up matched to the rooms that actually need to dry. From €16 per day.
View this unit
For larger rooms or several drying zones. The capacity you need depends on the volume and the wet materials. The layout of your site decides where the units go. From €12 per day.
View this unit
For extra heat on a cold site. This electric heater needs a suitable 400 V connection. Have it checked in advance whether the available supply matches the connected load. From €12 per day.
View this unit
For air circulation alongside the dehumidifier. A fan helps move air along damp surfaces. It does not remove moisture from the room itself and does not replace the dehumidifier. From €4 per day.
View this unitWe deliver to Hasselt, Genk, Sint-Truiden, Maaseik and the other municipalities in Limburg. Delivery, installation and collection are included in your drying package. Give us the full site address, your preferred start date and a contact person. Mention anything unusual, such as a narrow passage, a floor without a fixed staircase or limited loading space, before we arrange the delivery.
The technician spreads the units over the agreed drying zones and explains how to use the set-up. We also go through the condensate drain and what you check yourself during the hire. Keep the access clear and make sure the agreed power supply is available. If something changes on site or water gets in again, get in touch with us.
Among other places, we deliver to Hasselt, Genk, Sint-Truiden, Tongeren, Beringen, Lommel, Bilzen, Maasmechelen, Houthalen, Heusden-Zolder, Diepenbeek, Bree, Peer, Maaseik, Lanaken, Leopoldsburg.
Book with deliveryA single unit can be collected by appointment from our warehouse at Boomsesteenweg 12, unit 11 in Aartselaar. Book in advance and check the collection rates. When choosing between collection and delivery, take the return trip into account as well. Make sure the unit fits in your vehicle and follow the transport instructions for the model you chose.
If you collect the unit, you set it up yourself. So tell us in advance what needs to dry and what power connection you have. For several rooms, hard-to-reach areas or if you are unsure about the capacity you need, you can ask for advice on a drying package with installation. The agreed hire period and any extras are shown in your booking.
Boomsesteenweg 12, Unit 11, 2630 Aartselaar
Mon–Fri 08:00–17:00, by appointment
Take a look at projects completed in this region. For each project you will find the location, the work carried out and the available photos.
The table helps you plan the hire period. A guide time does not confirm that the material is dry enough. The check before finishing is still needed.
| What needs to dry | Without a dehumidifier | With a Vernast drying package |
|---|---|---|
| Cement screed 5 cm | 6 to 9 weeks | 2 weeks |
| Cement screed 6 cm | 8 to 12 weeks | 3 weeks |
| Cement screed 7 cm | 10 to 15 weeks | 4 weeks |
| Plasterwork 1 cm | 1 to 2 weeks | 2 weeks |
| Plasterwork 2 cm | 2 to 4 weeks | 3 weeks |
| Plasterwork 3 cm | 3 to 6 weeks | 4 weeks |
The table gives guide values for planning. The actual drying time depends on the material and the conditions on site. Before finishing, have the residual moisture checked against the requirements of your floor layer or decorator. For calculated packages, free continued hire applies under the drying guarantee terms. How long screed needs to dry explains it case by case.
We deliver everywhere in Limburg. Choose your municipality below for details on hire, delivery and collection. Is your town not listed? Get in touch.
Delivery to Hasselt, Genk, Zonhoven and the other places below. Choose your municipality for details on hiring a dehumidifier.
Delivery to Beringen, Heusden-Zolder, Houthalen-Helchteren and the other places below. Choose your municipality for details on hiring a dehumidifier.
Delivery to Maaseik, Kinrooi, Dilsen-Stokkem and the other places below. Choose your municipality for details on hiring a dehumidifier.
Delivery to Sint-Truiden, Tongeren-Borgloon, Bilzen-Hoeselt and the other places below. Choose your municipality for details on hiring a dehumidifier.
From your request to collection. We agree the installation, explain how to use the units and follow the drying process with moisture readings.
Calculate your package online or call us for advice. Give us your site address, your preferred start date and the dimensions of the rooms.
At the agreed time the technician installs the units, connects the condensate drain and explains how to use them.
Use the set-up as the technician explained. Check the condensate drain and report any faults or new moisture problems.
We check the moisture and arrange collection. For calculated packages, free continued hire applies if the drying guarantee terms are met.
Read how customers experience Vernast's delivery, appointments and follow-up. These reviews are about our service across our whole service area.
“Snelle respons en dezelfde dag nog een droger geïnstalleerd. Top service!”
“Zeer goede service en flexibiliteit. Werken zijn uitstekend uitgevoerd. Vriendelijk personeel. Firma zeker aan te raden.”
“We zijn bijzonder tevreden. Het personeel is professioneel én vriendelijk. Het werk is grondig uitgevoerd. Bovendien werd het achteraf goed opgevolgd.”
Our drying experts will help you straight away, with advice tailored to your situation.
Calculate your drying package online or contact us with your address in Limburg, the size of the room and your preferred start date. Let us know the floor level and the available power supply too. We then agree the delivery time and access to the site with you.
That depends on the volume, the layout, the material and the amount of moisture. An open-plan floor needs a different set-up from several closed rooms. Use the calculator for your package and ask for advice if your situation is different, for example with a high room or hidden moisture.
The hire period alone gives no certainty about that. Have the residual moisture checked with a method that suits the material. Your floor layer or decorator decides which moisture reading, and any further measurement, is needed before the chosen finish can be applied.
A construction dehumidifier helps remove moisture, but it does not repair a leak, water ingress or a missing damp-proof barrier. Have the cause investigated first. If new water keeps coming in, the material can get wet again, even while the dehumidifier is running.
The connected load differs per unit. Check the data sheet and tell us which connection is available on your site. The 20 and 30 kW electric site heaters need a suitable 400 V supply. If in doubt, have the available capacity and the circuit protection checked.
Collection is possible by appointment from our warehouse in Aartselaar, Boomsesteenweg 12, unit 11. Book your unit in advance and make sure it fits in your vehicle. Follow the transport instructions for the chosen unit. With a delivered drying package, we take care of installation and collection.
Installed and set up by our technician, with a moisture reading at the start and at handover. Prefer to talk it through first? Feel free to call us.

Briefly describe what needs to dry and how big the room is. A drying specialist will reply within one working day, with a proposal for the right package.