Province of Liège · on the plateau above the city

Construction dehumidifier hire in Ans

Ans lies on the plateau west of Liège, where the city gives way to the open countryside of the Hesbaye. At Loncin the E40 and the E313 meet. The fort of Loncin was part of the ring of forts around Liège. Alleur and Xhendremael also belong to the municipality.

Vernast's service area, with Ans in the province of LiègeAns
Delivery and installation includedWith a delivered drying package
One point of contact for your site

What does dehumidifier hire cost in Ans?

The right price starts with what needs to dry. For a whole house, wet screed or plasterwork you calculate a complete drying package; for a single room, a single unit may be suitable. Delivery in Ans is included in your drying package.

You hire a drying package calculated on the volume, the material and the temperature of your site. The price is known in advance and covers delivery, installation, the moisture reading at the start and at handover, and collection. Not dry within the calculated period? Then the hire continues free of charge, under the terms.

A single construction dehumidifier, set up yourself
from €9 per day, excl. VAT
Drying package tailored to your site
one fixed price, calculated in advance
Delivery, installation, moisture reading and collection
included in every package
Deposit
none
Worry-free hire with Vernast: one price up front, no deposit
Price known in advanceno deposit, no extra charges afterwards
Your complete drying package

Construction drying in Ans, from installation to a dry result.

You don't need to combine units yourself. We calculate your drying package based on the floor area, the material and the layer thickness. You see the package price in advance, including delivery to postcode 4430, installation, readings before and after, and collection.

Screed drying

A calculated set-up for your floor, matched to the thickness of the screed. The final reading helps you and your floor layer decide when finishing can start.

More about this drying

Plasterwork and new builds

Construction dehumidifiers and fans for even drying throughout the house. We choose the capacity and spread the units over the rooms.

More about this drying

Drying after water damage

A leak or a flood? Have the cause repaired and standing water removed first. We assess the wet materials and match the drying to them.

More about this drying

100% drying guarantee included. Is the material still not dry within the calculated period, despite correct drying conditions? Then you keep hiring the units free of charge, under our drying guarantee terms. This applies to calculated packages that we deliver and install; single units for collection are not covered.

No deposit. The calculator shows your total price and the extras you choose yourself, such as a condensate pump, extra heating or an official moisture report.

The buildings here

Workers' houses from the mining past, new builds on the plateau

Ans was a coal-mining municipality. The mines closed long ago, but you can still see their mark in the long rows of workers' houses. Between them lie newer housing estates. From our warehouse in Aartselaar it takes us just over an hour to drive to Ans.

A workers' house in Ans is narrow and has a small cellar or none at all. The walls are often solid brick, without a cavity. During a renovation it gets new plasterwork and sometimes a screed. The volume is small, so the air quickly becomes saturated. A compact dehumidifier in a closed room does more here than a big unit in an open house.

With a new build, a cellar under construction sometimes stays wet for a long time after rain. Pump out the standing water first before you start drying. If you see a crack in a wall where moisture is getting in, have that repaired first. During installation the technician looks at where the moisture is coming from.

Ground floor after water damage, with construction dehumidifiers against the stripped walls
Collection point
Aartselaar, by appointment
Delivery
As per your confirmed booking
Transport cost
None, included in the drying package
Postcode
4430
Which unit you need depends on your room, not on your municipality. The full range with capacities and daily rates is on our page for deliveries in the province of Liège, or calculate your set-up straight away in the drying calculator. Prefer to collect it yourself? You can, in Aartselaar.
The units

The units most often used in Ans

Vernast Boost, Boost condensation dehumidifier extracting 50 litres a day for rooms up to 250 m³

Boost construction dehumidifier

For a narrow workers' house: compact, 50 litres a day and suitable for rooms up to about 250 m³. Dry room by room with the door shut.

View this unit
Vernast Performance, Performance condensation dehumidifier extracting 70 litres a day for rooms up to 400 m³

Performance construction dehumidifier

For a new build in Loncin or Alleur: 70 litres a day, ample for a ground floor where the screed has just been poured.

View this unit
Vernast Turbo, 2,250 m³/h, blows precisely across floors and screed

Turboflow radial fan

For a cellar under construction: this radial fan blows in a targeted way over the wet floor and into the corners, where water stands longest.

View this unit
Vernast Turbo Highflow, site fan moving 4,500 m³/h of air

Highflow axial fan

In a deep terraced house without through-flow, this fan moves 4,500 m³ of air an hour, so the back extension dries too.

View this unit
See the options for your project and ask for advice on the right set-up. Calculate the drying package for your room or see all units.
Two ways

Collection or delivery in Ans?

Delivery in Ans: right by the Loncin interchange

Ans lies next to the Loncin interchange. Via the E313, outside rush hour, we get there in just over an hour. You choose a delivery date when you book, and we agree the exact delivery time with you. The technician places the unit, sets it up and takes a moisture reading at the start.

Collection point
Aartselaar, by appointment
Delivery time
As per your confirmed booking
Transport and installation
Included in the drying package
Postcode
4430
Book with delivery

Collecting: straight along the E313

Aartselaar is just over an hour further along the same motorway. If you are heading towards Antwerp anyway, you can take a unit with you. Always transport a dehumidifier upright. If your renovation needs more than one unit, delivery is simpler.

Boomsesteenweg 12, Unit 11, 2630 Aartselaar
Mon–Fri 08:00–17:00, by appointment

How collection works
From the field

Sites we dried in the province of Liège

Sites in the province of Liège, each with photos of the site itself. The same team, the same reading at the start and at handover.

View all sites in the province of Liège

How long does it take

Drying times with and without a dehumidifier.

The table helps you plan the hire period. A guide time does not confirm that the material is dry enough. The check before finishing is still needed.

Drying times by material and thickness
What needs to dryWithout a dehumidifierWith a Vernast drying package
Cement screed 5 cm6 to 9 weeks2 weeks
Cement screed 6 cm8 to 12 weeks3 weeks
Cement screed 7 cm10 to 15 weeks4 weeks
Plasterwork 1 cm1 to 2 weeks2 weeks
Plasterwork 2 cm2 to 4 weeks3 weeks
Plasterwork 3 cm3 to 6 weeks4 weeks

The table gives guide values for planning. The actual drying time depends on the material and the conditions on site. Before finishing, have the residual moisture checked against the requirements of your floor layer or decorator. For calculated packages, free continued hire applies under the drying guarantee terms. How long screed needs to dry explains it case by case.

Where we deliver

Arrondissement of Liège, and the rest of the province.

We deliver in Ans and the surrounding municipalities. Choose a place below for details on hire and delivery, or see our service area in the province of Liège.

Need advice for your site? Talk through the dimensions, the material and your planning. Call us on 03 689 90 65 or calculate your package straight away.
How it works

From booking to collection in Ans.

From your request to collection. We agree the installation, explain how to use the units and follow the drying process with moisture readings.

01

You book

Calculate your package online or call us for advice. Give us your site address, your preferred start date and the dimensions of the rooms.

02

We drive to Ans

At the agreed time the technician installs the units, connects the condensate drain and explains how to use them.

03

The set-up runs

Use the set-up as the technician explained. Check the condensate drain and report any faults or new moisture problems.

04

We measure and collect

We check the moisture and arrange collection. For calculated packages, free continued hire applies if the drying guarantee terms are met.

Here we deliver by appointment. We also drive outside the province of Liège, although the journey then counts in the planning. Dehumidifier hire nearby: Liège, Saint-Nicolas, Awans, Juprelle or Grâce-Hollogne. Unsure about the number of units? Call us on 03 689 90 65 or calculate your package straight away.
What customers say

Our customers' experiences.

Read how customers experience Vernast's delivery, appointments and follow-up. These reviews are about our service across our whole service area.

“Snelle respons en dezelfde dag nog een droger geïnstalleerd. Top service!”
Matt DemyttenaereBouwdroger geïnstalleerd
“Zeer goede service en flexibiliteit. Werken zijn uitstekend uitgevoerd. Vriendelijk personeel. Firma zeker aan te raden.”
Ingrid Janssensmrt 2025
Solvari
“We zijn bijzonder tevreden. Het personeel is professioneel én vriendelijk. Het werk is grondig uitgevoerd. Bovendien werd het achteraf goed opgevolgd.”
Leosep 2024
Frequently asked questions

What customers in Ans ask us.

Is your question not listed?

Our drying experts will help you straight away, with advice tailored to your situation.

A dehumidifier removes moisture from the wall and the air, but as long as water gets in through the crack, it keeps coming back. Have the crack repaired or sealed first. After that the wall dries faster with a unit, and the technician can check whether the moisture is going down.

For a narrow terraced house, one compact dehumidifier is often enough. You move it from room to room or leave it in the largest room with the doors shut. If the ground floor also gets a new screed, a second unit or a fan is useful.

Yes, Alleur and Xhendremael are part of Ans and within our delivery area. In Xhendremael it is more likely to be rural homes and farmhouses. Tell us what the access is like there, so the van does not get stuck on a narrow farm track.

First pump out the standing water. A dehumidifier is meant for the moisture left behind in the floor and walls, not for a puddle. After that a dehumidifier, together with a radial fan blowing over the floor, removes that residual moisture.

Need a construction dehumidifier in Ans

Calculate your drying package and choose your delivery date.

Installed and set up by our technician, with a moisture reading at the start and at handover. Prefer to talk it through first? Feel free to call us.

Vernast technician by the van with a construction dehumidifier
A question about your situation?

A question about drying in Ans?

Briefly describe what needs to dry and how big the room is. A drying specialist will reply within one working day, with a proposal for the right package.

We only use your details to answer your question. Rather have a price straight away? Calculate your drying package.
03 689 90 65