
Performance construction dehumidifier
For a deep terraced house in the centre of Virton: 70 litres a day and a range of up to about 400 m³. Enough for a ground floor newly plastered from front to back.
View this unitVirton is the capital of the Gaume, the southernmost region of Belgium, against the French border. The town lies in the valley of the Ton. Ethe, Bleid, Latour, Ruette and Saint-Mard also belong to the municipality.
VirtonThe right price starts with what needs to dry. For a whole house, wet screed or plasterwork you calculate a complete drying package; for a single room, a single unit may be suitable. Delivery in Virton is included in your drying package.
You hire a drying package calculated on the volume, the material and the temperature of your site. The price is known in advance and covers delivery, installation, the moisture reading at the start and at handover, and collection. Not dry within the calculated period? Then the hire continues free of charge, under the terms.

You don't need to combine units yourself. We calculate your drying package based on the floor area, the material and the layer thickness. You see the package price in advance, including delivery to postcode 6760, installation, readings before and after, and collection.
A calculated set-up for your floor, matched to the thickness of the screed. The final reading helps you and your floor layer decide when finishing can start.
More about this dryingConstruction dehumidifiers and fans for even drying throughout the house. We choose the capacity and spread the units over the rooms.
More about this dryingA leak or a flood? Have the cause repaired and standing water removed first. We assess the wet materials and match the drying to them.
More about this drying100% drying guarantee included. Is the material still not dry within the calculated period, despite correct drying conditions? Then you keep hiring the units free of charge, under our drying guarantee terms. This applies to calculated packages that we deliver and install; single units for collection are not covered.
No deposit. The calculator shows your total price and the extras you choose yourself, such as a condensate pump, extra heating or an official moisture report.
The Gaume has a milder climate than the Ardennes and a chalky soil. The villages are built in Lorraine style: the houses stand side wall to side wall, with house, stable and barn under one long roof. From Aartselaar it takes us about two and a half hours to get there. That is why we plan every delivery with you in advance.
A Gaume house is narrow at the street and deep. The rooms lie one behind the other, and the middle ones get little daylight and little fresh air. After new plasterwork the moisture lingers longest there. Put the dehumidifier in that middle room and let a fan move the air to the front and back. That works better than two units against the façades.
The walls are usually thick limestone or sandstone without a damp-proof course. If you bring the old stable or barn into the house, a new floor slab with screed goes onto a base that was always damp. So have it measured whether the moisture in the wall is construction moisture or rising damp from the ground. A dehumidifier does not solve the latter for good.


For a deep terraced house in the centre of Virton: 70 litres a day and a range of up to about 400 m³. Enough for a ground floor newly plastered from front to back.
View this unit
In a Lorraine floor plan the air does not flow from the street to the garden by itself. This fan moves 4,500 m³ of air an hour through the middle rooms, where the moisture would otherwise stand still.
View this unit
For the new screed in a converted stable. The radial fan blows the damp layer of air away flat across the floor, even under the stairs and in the corners.
View this unit
A barn becoming a home is, in winter, a cold volume with thick stone walls. This 20 kW heater brings the room above 15 °C. It needs a 400 V three-phase connection.
View this unitFrom Aartselaar we drive via the Brussels ring road and the E411 to the south of the province, about 245 km or two and a half hours. You choose a delivery date when you book. Because delivery in Wallonia is by appointment, we agree the time with you in advance. The technician places the units per drying zone and explains which doors must stay shut.
Collecting a single unit is possible, but from Virton you are on the road for about five hours, there and back. When you return it, you make that trip again. A construction dehumidifier also has to be transported upright. With a drying package, delivery, installation and collection are included.
Boomsesteenweg 12, Unit 11, 2630 Aartselaar
Mon–Fri 08:00–17:00, by appointment
Sites in the province of Luxembourg, each with photos of the site itself. The same team, the same reading at the start and at handover.
The table helps you plan the hire period. A guide time does not confirm that the material is dry enough. The check before finishing is still needed.
| What needs to dry | Without a dehumidifier | With a Vernast drying package |
|---|---|---|
| Cement screed 5 cm | 6 to 9 weeks | 2 weeks |
| Cement screed 6 cm | 8 to 12 weeks | 3 weeks |
| Cement screed 7 cm | 10 to 15 weeks | 4 weeks |
| Plasterwork 1 cm | 1 to 2 weeks | 2 weeks |
| Plasterwork 2 cm | 2 to 4 weeks | 3 weeks |
| Plasterwork 3 cm | 3 to 6 weeks | 4 weeks |
The table gives guide values for planning. The actual drying time depends on the material and the conditions on site. Before finishing, have the residual moisture checked against the requirements of your floor layer or decorator. For calculated packages, free continued hire applies under the drying guarantee terms. How long screed needs to dry explains it case by case.
We deliver in Virton and the surrounding municipalities. Choose a place below for details on hire and delivery, or see our service area in the province of Luxembourg.
Delivery to Chiny, Florenville, Habay and the other places below. Choose your municipality for details on hiring a dehumidifier.
See for each municipality how to hire a construction dehumidifier, what a drying package includes and how to arrange delivery.
From your request to collection. We agree the installation, explain how to use the units and follow the drying process with moisture readings.
Calculate your package online or call us for advice. Give us your site address, your preferred start date and the dimensions of the rooms.
At the agreed time the technician installs the units, connects the condensate drain and explains how to use them.
Use the set-up as the technician explained. Check the condensate drain and report any faults or new moisture problems.
We check the moisture and arrange collection. For calculated packages, free continued hire applies if the drying guarantee terms are met.
Read how customers experience Vernast's delivery, appointments and follow-up. These reviews are about our service across our whole service area.
“Snelle respons en dezelfde dag nog een droger geïnstalleerd. Top service!”
“Zeer goede service en flexibiliteit. Werken zijn uitstekend uitgevoerd. Vriendelijk personeel. Firma zeker aan te raden.”
“We zijn bijzonder tevreden. Het personeel is professioneel én vriendelijk. Het werk is grondig uitgevoerd. Bovendien werd het achteraf goed opgevolgd.”
Our drying experts will help you straight away, with advice tailored to your situation.
Yes. Virton is within our delivery area, about 245 km or two and a half hours' drive via Brussels and the E411. You choose a delivery date when you book, and because we deliver by appointment in Wallonia, we agree the time with you in advance.
Put the dehumidifier in that middle room itself and let a fan move the air to the front and back rooms. Keep outside doors and windows shut. Without air movement the moisture stays against the walls, however big the unit.
Not for good. A dehumidifier removes the construction moisture from new plasterwork and fresh screed. Water rising from the ground through a wall without a damp-proof course comes back after drying. A moisture reading shows which of the two you have in the house.
Questions? Feel free to email or call us. You make your booking on our website, with the site address, the delivery date you want and the rooms that need drying.
Installed and set up by our technician, with a moisture reading at the start and at handover. Prefer to talk it through first? Feel free to call us.

Briefly describe what needs to dry and how big the room is. A drying specialist will reply within one working day, with a proposal for the right package.