
Ultimate construction dehumidifier
For a new build on the plateau with screed across the whole ground floor. The Ultimate pulls up to 110 litres a day out of a room of up to about 600 m³.
View this unitBertrix is a slate municipality. For centuries slate was quarried here in underground workings, and one of them can be visited today as a museum. You can still see it in the villages: almost every older house has a slate roof, often with a slate-clad front as well.
BertrixThe right price starts with what needs to dry. For a whole house, wet screed or plasterwork you calculate a complete drying package; for a single room, a single unit may be suitable. Delivery in Bertrix is included in your drying package.
You hire a drying package calculated on the volume, the material and the temperature of your site. The price is known in advance and covers delivery, installation, the moisture reading at the start and at handover, and collection. Not dry within the calculated period? Then the hire continues free of charge, under the terms.

You don't need to combine units yourself. We calculate your drying package based on the floor area, the material and the layer thickness. You see the package price in advance, including delivery to postcode 6880, installation, readings before and after, and collection.
A calculated set-up for your floor, matched to the thickness of the screed. The final reading helps you and your floor layer decide when finishing can start.
More about this dryingConstruction dehumidifiers and fans for even drying throughout the house. We choose the capacity and spread the units over the rooms.
More about this dryingA leak or a flood? Have the cause repaired and standing water removed first. We assess the wet materials and match the drying to them.
More about this drying100% drying guarantee included. Is the material still not dry within the calculated period, despite correct drying conditions? Then you keep hiring the units free of charge, under our drying guarantee terms. This applies to calculated packages that we deliver and install; single units for collection are not covered.
No deposit. The calculator shows your total price and the extras you choose yourself, such as a condensate pump, extra heating or an official moisture report.
The centre lies on the Ardennes plateau, with newer residential areas and a business park on the edge. To the south the municipality drops down to the Semois, where Cugnon and Auby-sur-Semois lie in the valley. Jehonville and Orgeo also belong to Bertrix. From Aartselaar it takes us about two hours to get there.
On the plateau new houses go up regularly, with fresh screed and new plasterwork. The climate is cooler and wetter there than in Flanders. A new build that becomes wind- and watertight in autumn rarely dries before winter without help. A dehumidifier with a fan across the floor makes up that lost ground.
In an older house with a slate-clad front, the moisture often sits behind the slates, in a wall that can hardly breathe out. If you renew the cladding or replaster the inside, that wall dries slowly. In Cugnon and Auby there is also the damp air of the Semois, and houses often stand half against the slope.


For a new build on the plateau with screed across the whole ground floor. The Ultimate pulls up to 110 litres a day out of a room of up to about 600 m³.
View this unit
Blows low and straight across a fresh screed, so the floor dries evenly and not just on top.
View this unit
For an older house with a slate front that you are doing up floor by floor: up to 70 litres a day, for rooms up to about 400 m³.
View this unit
Brings an unheated shell up to temperature in the Ardennes winter, so the condensation dehumidifier works well. It needs a 400 V connection.
View this unitFrom Aartselaar we drive via Brussels and Namur down the E411, into the heart of the province of Luxembourg. Allow about two hours. You choose a delivery date when you book, and we agree the time with you, so we can combine trips in the area. The technician places the units per drying zone and notes the moisture readings of floor and wall at the start.
Our collection point is about two hours from Bertrix. Picking up a unit therefore costs you about four hours' driving, and returning it the same again. For a site on the plateau delivery is the logical choice: the technician brings the units and sets them up on site.
Boomsesteenweg 12, Unit 11, 2630 Aartselaar
Mon–Fri 08:00–17:00, by appointment
Sites in the province of Luxembourg, each with photos of the site itself. The same team, the same reading at the start and at handover.
The table helps you plan the hire period. A guide time does not confirm that the material is dry enough. The check before finishing is still needed.
| What needs to dry | Without a dehumidifier | With a Vernast drying package |
|---|---|---|
| Cement screed 5 cm | 6 to 9 weeks | 2 weeks |
| Cement screed 6 cm | 8 to 12 weeks | 3 weeks |
| Cement screed 7 cm | 10 to 15 weeks | 4 weeks |
| Plasterwork 1 cm | 1 to 2 weeks | 2 weeks |
| Plasterwork 2 cm | 2 to 4 weeks | 3 weeks |
| Plasterwork 3 cm | 3 to 6 weeks | 4 weeks |
The table gives guide values for planning. The actual drying time depends on the material and the conditions on site. Before finishing, have the residual moisture checked against the requirements of your floor layer or decorator. For calculated packages, free continued hire applies under the drying guarantee terms. How long screed needs to dry explains it case by case.
We deliver in Bertrix and the surrounding municipalities. Choose a place below for details on hire and delivery, or see our service area in the province of Luxembourg.
Delivery to Bertrix, Bouillon, Daverdisse and the other places below. Choose your municipality for details on hiring a dehumidifier.
See for each municipality how to hire a construction dehumidifier, what a drying package includes and how to arrange delivery.
From your request to collection. We agree the installation, explain how to use the units and follow the drying process with moisture readings.
Calculate your package online or call us for advice. Give us your site address, your preferred start date and the dimensions of the rooms.
At the agreed time the technician installs the units, connects the condensate drain and explains how to use them.
Use the set-up as the technician explained. Check the condensate drain and report any faults or new moisture problems.
We check the moisture and arrange collection. For calculated packages, free continued hire applies if the drying guarantee terms are met.
Read how customers experience Vernast's delivery, appointments and follow-up. These reviews are about our service across our whole service area.
“Snelle respons en dezelfde dag nog een droger geïnstalleerd. Top service!”
“Zeer goede service en flexibiliteit. Werken zijn uitstekend uitgevoerd. Vriendelijk personeel. Firma zeker aan te raden.”
“We zijn bijzonder tevreden. Het personeel is professioneel én vriendelijk. Het werk is grondig uitgevoerd. Bovendien werd het achteraf goed opgevolgd.”
Our drying experts will help you straight away, with advice tailored to your situation.
As a rule of thumb, about a week per centimetre of thickness, and in the cool Ardennes climate it tends to take longer. With a dehumidifier and a fan across the floor it goes faster. Have the moisture measured before you lay parquet or tiles; the technician takes a first reading at the start.
From the inside, yes: the dehumidifier draws the moisture out of the plasterwork and wall on the inner side. If water is getting behind the slates because the cladding leaks, have that leak repaired first. Otherwise you are drying inside what keeps getting wet outside.
Below about fifteen degrees a condensation dehumidifier loses a lot of efficiency, and in the Ardennes winter a shell is almost always colder than that. Then add an electric site heater, or choose a desiccant dehumidifier, which keeps working in the cold.
Yes, although it is one of our longest trips. You choose a delivery date online, then we agree the time with you. That way we can combine deliveries in Bertrix and the surrounding municipalities, and you do not have to wait on site all day.
Installed and set up by our technician, with a moisture reading at the start and at handover. Prefer to talk it through first? Feel free to call us.

Briefly describe what needs to dry and how big the room is. A drying specialist will reply within one working day, with a proposal for the right package.