
Performance construction dehumidifier
For a new-build house on the village edge: 70 litres a day, for a volume of up to about 400 m³.
View this unitAttert lies north of Arlon, in the valley of the river of the same name, which flows on into the Grand Duchy of Luxembourg. The municipality includes villages such as Nobressart, Nothomb, Thiaumont and Tontelange. The valley is a nature park.
AttertThe right price starts with what needs to dry. For a whole house, wet screed or plasterwork you calculate a complete drying package; for a single room, a single unit may be suitable. Delivery in Attert is included in your drying package.
You hire a drying package calculated on the volume, the material and the temperature of your site. The price is known in advance and covers delivery, installation, the moisture reading at the start and at handover, and collection. Not dry within the calculated period? Then the hire continues free of charge, under the terms.

You don't need to combine units yourself. We calculate your drying package based on the floor area, the material and the layer thickness. You see the package price in advance, including delivery to postcode 6717, installation, readings before and after, and collection.
A calculated set-up for your floor, matched to the thickness of the screed. The final reading helps you and your floor layer decide when finishing can start.
More about this dryingConstruction dehumidifiers and fans for even drying throughout the house. We choose the capacity and spread the units over the rooms.
More about this dryingA leak or a flood? Have the cause repaired and standing water removed first. We assess the wet materials and match the drying to them.
More about this drying100% drying guarantee included. Is the material still not dry within the calculated period, despite correct drying conditions? Then you keep hiring the units free of charge, under our drying guarantee terms. This applies to calculated packages that we deliver and install; single units for collection are not covered.
No deposit. The calculator shows your total price and the extras you choose yourself, such as a condensate pump, extra heating or an official moisture report.
Many residents work in the Grand Duchy. As a result, new homes stand next to the old, elongated farmhouses, and each needs a different approach to drying. Our technician drives over two hours to get there.
In a new-build house the water is mainly in the screed and the plasterwork. It has to come out before the parquet or the tiles are laid. A house on open land cools down quickly, and in a cold room fresh screed dries slowly. A radial fan blowing low across the floor makes the top layer dry evenly.
In the natural-stone farmhouses the work is mostly conversion: a barn or stable becomes living space, with thick walls without a damp-proof course and often a new floor slab. Part of that moisture was there long before the work started. So first have it measured which part is construction moisture, because that is all a dehumidifier removes.


For a new-build house on the village edge: 70 litres a day, for a volume of up to about 400 m³.
View this unit
This radial fan (2,250 m³/h) blows low and directly across fresh screed, so the floor dries evenly.
View this unit
For a converted barn or stable with a large volume and thick stone walls: 110 litres a day, up to about 600 m³.
View this unit
Brings an unheated house above 15 °C, so the dehumidifier works properly. This 20 kW heater needs three-phase power (400 V).
View this unitAttert is over two hours' drive from Aartselaar, beyond Namur and Arlon. You choose a delivery date when you book. We then agree the delivery time by phone or email. If the house is on a narrow country lane or behind a yard with a gate, describe the access. That way the technician knows in advance how to bring the units in.
There and back to Aartselaar you drive for over four hours, and that costs you a working day. A dehumidifier also has to be transported upright. Better to have it delivered, so it is set up properly straight away.
Boomsesteenweg 12, Unit 11, 2630 Aartselaar
Mon–Fri 08:00–17:00, by appointment
Sites in the province of Luxembourg, each with photos of the site itself. The same team, the same reading at the start and at handover.
The table helps you plan the hire period. A guide time does not confirm that the material is dry enough. The check before finishing is still needed.
| What needs to dry | Without a dehumidifier | With a Vernast drying package |
|---|---|---|
| Cement screed 5 cm | 6 to 9 weeks | 2 weeks |
| Cement screed 6 cm | 8 to 12 weeks | 3 weeks |
| Cement screed 7 cm | 10 to 15 weeks | 4 weeks |
| Plasterwork 1 cm | 1 to 2 weeks | 2 weeks |
| Plasterwork 2 cm | 2 to 4 weeks | 3 weeks |
| Plasterwork 3 cm | 3 to 6 weeks | 4 weeks |
The table gives guide values for planning. The actual drying time depends on the material and the conditions on site. Before finishing, have the residual moisture checked against the requirements of your floor layer or decorator. For calculated packages, free continued hire applies under the drying guarantee terms. How long screed needs to dry explains it case by case.
We deliver in Attert and the surrounding municipalities. Choose a place below for details on hire and delivery, or see our service area in the province of Luxembourg.
Delivery to Arlon, Attert, Aubange and the other places below. Choose your municipality for details on hiring a dehumidifier.
See for each municipality how to hire a construction dehumidifier, what a drying package includes and how to arrange delivery.
From your request to collection. We agree the installation, explain how to use the units and follow the drying process with moisture readings.
Calculate your package online or call us for advice. Give us your site address, your preferred start date and the dimensions of the rooms.
At the agreed time the technician installs the units, connects the condensate drain and explains how to use them.
Use the set-up as the technician explained. Check the condensate drain and report any faults or new moisture problems.
We check the moisture and arrange collection. For calculated packages, free continued hire applies if the drying guarantee terms are met.
Read how customers experience Vernast's delivery, appointments and follow-up. These reviews are about our service across our whole service area.
“Snelle respons en dezelfde dag nog een droger geïnstalleerd. Top service!”
“Zeer goede service en flexibiliteit. Werken zijn uitstekend uitgevoerd. Vriendelijk personeel. Firma zeker aan te raden.”
“We zijn bijzonder tevreden. Het personeel is professioneel én vriendelijk. Het werk is grondig uitgevoerd. Bovendien werd het achteraf goed opgevolgd.”
Our drying experts will help you straight away, with advice tailored to your situation.
That depends on the thickness, the type of screed and the temperature in the house. With a dehumidifier, the windows shut and a fan across the floor it goes faster than on its own. Have the residual moisture measured before the floor layer starts.
Yes, for the construction moisture from new screed, plasterwork and mortar. An old stone wall without a damp-proof course does draw moisture up from the ground, and a dehumidifier does not solve that for good. So have it measured how wet the walls are and where the moisture comes from.
Yes, throughout the municipality, including the smaller hamlets. Give the full address when you book and describe the access. A narrow drive or a yard with a gate is no problem if the technician knows about it in advance.
Yes. Attert is a municipality in the Belgian province of Luxembourg, between Arlon and the border with the Grand Duchy. For a site on the other side of the border, it is best to contact us first.
Installed and set up by our technician, with a moisture reading at the start and at handover. Prefer to talk it through first? Feel free to call us.

Briefly describe what needs to dry and how big the room is. A drying specialist will reply within one working day, with a proposal for the right package.