Construction drying Mould removal Ventilation

Drying a home after a leak in Brussels

Water damage · Brussels · Construction dehumidifier hire in Brussels

After a leak in this home in Brussels, the water that got in had pushed the moisture level up sharply. Vernast mapped the damage with moisture readings and started construction drying straight away. This prevented further damage, the mould was removed and the indoor climate was fully restored.

Home in Brussels where Vernast carried out construction drying and mould removal after water damage
Treatment
Construction drying+ mould removal
Diagnosis
Water damageafter a leak
Analysis & drying plan
24 hmoisture reading + equipment placed
Climate recovery
4 working dayscontrolled drying out
The project

The situation on arrival

When Vernast arrived at this Brussels home, the situation was urgent. A leak had carried water deep into the structure, causing the moisture level in the walls and floor to rise sharply. Without swift intervention, mould growth and lasting damage to the finishes and masonry were on the cards.

  • Water getting in through a leak in the home
  • Sharply increased moisture values in walls and floor
  • Early mould growth on the damp surfaces
  • Risk of structural damage if the moisture stayed put

Our diagnosis

Moisture readings at several points let us map the extent of the damage accurately. The picture was clear: water damage after a leak. The excess water had settled into the building materials. As long as that moisture is not removed in a controlled way, mould and odour nuisance keep coming back and the moisture continues to affect the structure.

The work, step by step

Within 24 h, analysis and drying plan. Right after the assessment, we drew up a drying plan and placed the first construction dehumidifiers and fans at strategic points in the home.

Construction drying with professional equipment. Thanks to a well-thought-out arrangement of construction dehumidifiers and fans, the moisture level was quickly brought down to a safe level, without disturbing the occupants more than necessary.

Mould removal, 3 days. The areas affected by moisture were thoroughly treated, so that every source of mould disappeared and the surfaces became healthy again.

Climate recovery, 4 days. The home was given the chance to dry out in a controlled way, monitored with climate and air measurements until a stable, healthy indoor climate was reached.

Behind the scenes

The project in pictures

From the first assessment of the water damage to the dry, treated home. Browse with the arrows or pick a step below.

Water damage in the Brussels home at the start of the works
1 / 18Water damage in the home at the start
Damp patches on wall and ceiling mapped out
2 / 18Damp patches on wall and ceiling mapped out
Moisture reading on the affected wall
3 / 18Moisture reading on the affected wall
Close-up of a surface affected by moisture
4 / 18Close-up of the affected surface
Moisture damage along the wall junction
5 / 18Moisture damage along the wall junction
Visible traces of penetrating moisture
6 / 18Traces of penetrating moisture
Finish coming loose because of the moisture
7 / 18Finish coming loose because of the moisture
Assessment of the damp area before treatment
8 / 18Assessment of the damp area
Preparation for the mould removal
9 / 18Preparation for the mould removal
Treatment of the affected surfaces
10 / 18Treatment of the affected surfaces
Removal of the mould patches in the home
11 / 18Removal of the mould patches
Cleaned area after the mould treatment
12 / 18Cleaned area after the treatment
Construction dehumidifier placed in the room
13 / 18Construction dehumidifier placed in the room
Ventilation used for controlled drying
14 / 18Ventilation used for controlled drying
Drying setup with equipment in the home
15 / 18Drying setup in the home
Monitoring the moisture level during drying
16 / 18Monitoring the moisture level during drying
Room ready for climate recovery
17 / 18Room ready for climate recovery
Dry, healthy base after the works in Brussels
18 / 18Dry, healthy base after the works
The result

From water damage to a dry, healthy home

Why clients choose us

On site fast, lasting result

With water damage, every day counts. Our own team of Vernast-certified moisture experts responds straight away, with a drying plan and professional equipment that limit the damage. That way we tackle not only the water, but also the mould that follows it.

After the works

A dry base, ready for finishing

With the moisture removed, the mould treated and the indoor climate restored, the home is dry and healthy again. This project in Brussels shows how a fast diagnosis and a thorough approach prevent structural damage and mould for good.