
Turboflow radial fan
Across the new screed in a miner's house, where the floor holds most of the moisture.
View this unitMorlanwelz lies between La Louvière and Binche, in the Haine valley. Its best-known spot is the Mariemont estate, with its park and the Royal Museum of Mariemont.
MorlanwelzThe right price starts with what needs to dry. For a whole house, wet screed or plasterwork you calculate a complete drying package; for a single room, a single unit may be suitable. Delivery in Morlanwelz is included in your drying package.
You hire a drying package calculated on the volume, the material and the temperature of your site. The price is known in advance and covers delivery, installation, the moisture reading at the start and at handover, and collection. Not dry within the calculated period? Then the hire continues free of charge, under the terms.

You don't need to combine units yourself. We calculate your drying package based on the floor area, the material and the layer thickness. You see the package price in advance, including delivery to postcode 7140, installation, readings before and after, and collection.
A calculated set-up for your floor, matched to the thickness of the screed. The final reading helps you and your floor layer decide when finishing can start.
More about this dryingConstruction dehumidifiers and fans for even drying throughout the house. We choose the capacity and spread the units over the rooms.
More about this dryingA leak or a flood? Have the cause repaired and standing water removed first. We assess the wet materials and match the drying to them.
More about this drying100% drying guarantee included. Is the material still not dry within the calculated period, despite correct drying conditions? Then you keep hiring the units free of charge, under our drying guarantee terms. This applies to calculated packages that we deliver and install; single units for collection are not covered.
No deposit. The calculator shows your total price and the extras you choose yourself, such as a condensate pump, extra heating or an official moisture report.
The area around the estate lived for a long time off the coal mines. Morlanwelz, Carnières and Mont-Sainte-Aldegonde have rows of miners' houses left over from that time. Many of those houses now have new owners who are renovating them thoroughly. From Aartselaar we drive there in just over an hour.
A miner's house in Morlanwelz or Carnières is usually small and deep, with a narrow façade, a back kitchen and a floor laid on the ground. During a renovation that floor is often broken out and replaced by an insulated floor with screed. That screed holds most of the moisture in the house, and it determines when the floor layer can start.
Lower down in the valley the ground is damper, and walls without a damp-proof course stay wet there for longer. A dehumidifier removes the construction moisture, but moisture rising from the ground comes back. During installation the technician takes readings at the bottom and higher up the wall. That way you do not spend weeks drying moisture that keeps returning.


Across the new screed in a miner's house, where the floor holds most of the moisture.
View this unit
For a whole home under renovation: 70 litres a day, for rooms up to about 400 m³.
View this unit
For the back kitchen or a new bathroom on its own: compact, 50 litres a day, on 230 V.
View this unit
For an empty house being renovated in winter: 20 kW to bring the cold space up to temperature, on 400 V.
View this unitThe drive takes just over an hour, via the ring road, the E19 and the E42. You choose a delivery date when you book, and we deliver at an agreed time. The technician sets up the units per zone, lays the drain hose and notes the moisture reading in the screed, which you compare against later. In a narrow street of terraced houses, a free space in front of the door helps.
With just over an hour's drive each way, collecting only makes sense if you are heading towards Antwerp anyway. For a miner's house with a new floor you usually need a dehumidifier and a fan. Then delivery with installation and a moisture reading is the better choice.
Boomsesteenweg 12, Unit 11, 2630 Aartselaar
Mon–Fri 08:00–17:00, by appointment
Sites in Hainaut, each with photos of the site itself. The same team, the same reading at the start and at handover.
The table helps you plan the hire period. A guide time does not confirm that the material is dry enough. The check before finishing is still needed.
| What needs to dry | Without a dehumidifier | With a Vernast drying package |
|---|---|---|
| Cement screed 5 cm | 6 to 9 weeks | 2 weeks |
| Cement screed 6 cm | 8 to 12 weeks | 3 weeks |
| Cement screed 7 cm | 10 to 15 weeks | 4 weeks |
| Plasterwork 1 cm | 1 to 2 weeks | 2 weeks |
| Plasterwork 2 cm | 2 to 4 weeks | 3 weeks |
| Plasterwork 3 cm | 3 to 6 weeks | 4 weeks |
The table gives guide values for planning. The actual drying time depends on the material and the conditions on site. Before finishing, have the residual moisture checked against the requirements of your floor layer or decorator. For calculated packages, free continued hire applies under the drying guarantee terms. How long screed needs to dry explains it case by case.
We deliver in Morlanwelz and the surrounding municipalities. Choose a place below for details on hire and delivery, or see our service area in Hainaut.
Delivery to Binche, Estinnes, La Louvière and the other places below. Choose your municipality for details on hiring a dehumidifier.
See for each municipality how to hire a construction dehumidifier, what a drying package includes and how to arrange delivery.
From your request to collection. We agree the installation, explain how to use the units and follow the drying process with moisture readings.
Calculate your package online or call us for advice. Give us your site address, your preferred start date and the dimensions of the rooms.
At the agreed time the technician installs the units, connects the condensate drain and explains how to use them.
Use the set-up as the technician explained. Check the condensate drain and report any faults or new moisture problems.
We check the moisture and arrange collection. For calculated packages, free continued hire applies if the drying guarantee terms are met.
Read how customers experience Vernast's delivery, appointments and follow-up. These reviews are about our service across our whole service area.
“Snelle respons en dezelfde dag nog een droger geïnstalleerd. Top service!”
“Zeer goede service en flexibiliteit. Werken zijn uitstekend uitgevoerd. Vriendelijk personeel. Firma zeker aan te raden.”
“We zijn bijzonder tevreden. Het personeel is professioneel én vriendelijk. Het werk is grondig uitgevoerd. Bovendien werd het achteraf goed opgevolgd.”
Our drying experts will help you straight away, with advice tailored to your situation.
Expect a few weeks if there is a new screed and new plasterwork. The screed usually sets the duration: the thicker it is, the longer it takes. With a dehumidifier and a fan it goes noticeably faster, and the reading shows when the floor is ready for finishing.
Yes. In an empty, cold house in winter we put a site heater next to the dehumidifier, because below about 15 °C a condensation dehumidifier hardly dries at all. The heater needs a 400 V connection. If the house does not have one, we look at a desiccant dehumidifier together.
The dehumidifier keeps extracting water from the air as long as the walls and floor give off moisture. If the amount drops after a few days, things are going the right way. If it stays the same, ask us to come and take another reading.
Yes, but do not put it right against the cabinets and do not aim the outlet at the worktop. A moderate humidistat setting is enough. Wood and chipboard cope just as badly with drying too fast as with too much moisture.
Installed and set up by our technician, with a moisture reading at the start and at handover. Prefer to talk it through first? Feel free to call us.

Briefly describe what needs to dry and how big the room is. A drying specialist will reply within one working day, with a proposal for the right package.