Construction drying Water damage Mould treatment

Drying a storeroom after a leak in Berlare

Water damage · Berlare · Construction dehumidifier hire in East Flanders

Serious water damage was found after a leak in the storeroom. Thanks to a fast moisture reading and the targeted use of professional drying equipment, the moisture level was quickly brought under control. This prevented further damage to the walls, the floor and the stored items.

The storeroom in Berlare where Vernast carried out construction drying after water damage
Treatment
Construction dryingafter water damage
Analysis & solution
24 hmoisture reading and start-up
Mould treatment
3 dayspreventive treatment
Climate recovery
4 dayscontrolled drying
The project

The situation on arrival in Berlare

In this storeroom in Berlare, the situation after a water leak was urgent. The water had soaked deep into the walls and floor, sharply raising the moisture levels. Without a fast response, mould growth, a musty smell and permanent damage to the stored belongings were on the cards.

  • Serious water damage after a leak in the storeroom
  • Sharply raised moisture levels in walls and floor
  • Real risk of mould growth and a musty smell
  • Stored items and interior threatened by the moisture

Our diagnosis

A thorough moisture reading made things clear straight away: the leak had saturated the masonry and the floor build-up with water. As long as that moisture stays in the structure, mould and odours have free rein. The solution was not a quick wipe of the surface, but drying the room out completely and in a controlled way.

The work, step by step

Analysis and start-up, within 24 h. After the moisture reading, the approach was decided immediately and professional construction dehumidifiers were placed in the storeroom, aimed at the most saturated areas.

Targeted construction drying. The drying units continuously drew moisture out of the walls and floor. Throughout the process the moisture levels were monitored closely, so the drying could run its course without risk.

Mould treatment. To prevent the remaining moisture from turning into mould, the room was given preventive treatment.

Climate recovery. After roughly four days of controlled drying, the indoor climate was restored and the moisture levels were back at a safe value, ready for the storeroom to be used again.

Behind the scenes

The project in pictures

From the first assessment of the water damage to the complete construction drying of the storeroom. Browse with the arrows or pick an image below.

The storeroom in Berlare at the start, after the water damage
1 / 13The storeroom at the start, after the water damage
Moisture reading of the walls and floor in the storeroom
2 / 13Moisture reading of the walls and floor
Professional construction dehumidifier placed in the storeroom
3 / 13Professional construction dehumidifier in place
Drying unit at work against the moisture
4 / 13Drying unit at work against the moisture
Continuous drying of the wall and floor in the storeroom
5 / 13Continuous drying of the wall and floor
Monitoring the moisture levels during the drying process
6 / 13Monitoring the moisture levels
Construction dehumidifier aimed at the most saturated area
7 / 13Construction dehumidifier aimed at the saturated area
Drying process across the whole storeroom
8 / 13Drying process across the whole room
Checking the indoor climate during the drying
9 / 13Checking the indoor climate
Moisture extraction during the construction drying in the storeroom
10 / 13Moisture extraction during the construction drying
The storeroom in Berlare during the drying process
11 / 13The storeroom during the drying process
Overview of the drying set-up in the storeroom
12 / 13Overview of the drying set-up
Result after the construction drying in Berlare
13 / 13Result after the construction drying
The result

From acute water damage to a dry, healthy storeroom

Why customers choose us

On site fast, measuring before we dry

With water damage, every hour counts. Our own team of Vernast-certified moisture experts starts within the day with a precise moisture reading, so the construction drying is targeted and free of guesswork. That keeps the damage limited and you don't pay for work that isn't needed.

After the work

A storeroom you can use again

With the moisture drawn out of the walls and floor and the room given preventive treatment, the storeroom in Berlare is ready for use again. This project shows how a fast response and a controlled drying process prevent knock-on damage and mould.