Construction drying Mould removal Basement sealing

Drying a basement after a leak in Lokeren

Water damage · Lokeren · Construction dehumidifier hire in East Flanders

In this home in Lokeren, a leak in the basement wall caused serious water damage to the floor and the lower sections of the walls. Vernast stepped in quickly with professional construction dehumidifiers and precise moisture readings. The moisture level was brought down in a controlled way, preventing permanent damage and mould growth.

Home in Lokeren where Vernast treated the water damage after a leak in the basement wall
Treatment
Construction drying+ mould removal
Analysis & measurement
24 hdiagnosis and moisture readings
Construction drying
3 dayscontrolled drying
Climate recovery
4 daysfollow-up with readings
The project

The situation on arrival

When we visited in Lokeren, the damage was plain to see: water had come in through a leak in the basement wall and spread across the floor and the lower sections of the walls. The masonry was saturated, the air felt clammy and there was a musty smell, the start of a classic damp problem if nobody acts quickly.

  • Water from a leak in the basement wall, spread across the floor and lower walls
  • Sharply raised moisture levels in the masonry and screed
  • Early mould growth and a persistent musty, damp smell
  • Risk of permanent damage to the floor, walls and finishes

Our diagnosis

A thorough inspection with moisture readings at different heights quickly pinpointed the cause: a leak in the basement wall that let water soak into the masonry. Moisture levels were far above normal. Without fast drying and sealing the source, the moisture would have spread further into the structure and given mould every chance to take hold for good.

The work, step by step

Locating and sealing the source. First, the leak in the basement wall was traced and made watertight, so no more water could get in.

Fast construction drying. Vernast then placed professional construction dehumidifiers in the room. The walls, floor and air were dried in a controlled way until the moisture level was back at a safe value.

Follow-up with readings. Throughout the drying process we monitored the moisture levels closely, so we could adjust where needed and only finish the drying once the values were genuinely in order.

Mould removal and aftercare. The affected surfaces were treated and given aftercare, removing the early mould and handing the room back healthy and dry.

Behind the scenes

The project in pictures

From the first assessment of the water damage to the dry, treated room. Browse with the arrows or pick an image below.

The affected room in the home in Lokeren at the start of the work
1 / 15The affected room at the start of the work
Water damage visible on the lower section of the wall in Lokeren
2 / 15Water damage on the lower section of the wall
Traces of moisture around the basement wall after the leak
3 / 15Traces of moisture around the basement wall
Close-up of the moisture that has soaked into the masonry
4 / 15Moisture soaked into the masonry
Inspection of the damp surfaces before treatment
5 / 15Inspection of the damp surfaces
Assessing the damage before drying begins
6 / 15Assessing the damage before drying
Moisture reading to determine the moisture content of the wall
7 / 15Moisture reading to determine the moisture content
The area cleared and ready for drying
8 / 15The area cleared and ready for drying
Professional construction dehumidifier placed in the room in Lokeren
9 / 15Professional construction dehumidifier placed in the room
Controlled drying of the walls and floor
10 / 15Controlled drying of the walls and floor
Monitoring the drying process with moisture readings
11 / 15Monitoring the drying process with readings
Treated section of wall during the repair
12 / 15Treated section of wall during the repair
The room after the mould removal in Lokeren
13 / 15The room after the mould removal
Result after drying and treatment
14 / 15Result after drying and treatment
The home dry again and ready for finishing
15 / 15Dry again and ready for finishing
The result

From water damage to a dry, healthy base

Why customers choose us

Acting fast limits the damage

With water damage, every day counts. By sealing the source straight away and drying professionally, we kept the damage to the floor and walls in Lokeren limited, carried out by our own team of Vernast-certified moisture experts. That way you never pay twice for the same problem.

After the work

Dry, mould-free and ready for finishing

With the leak sealed, the moisture dried out in a controlled way and the surfaces treated, the room could be handed back dry and safe. This project shows how a fast diagnosis and a thorough approach prevent lasting damp problems.